This site is a B2B information site for professional use - clinical diagnostics products listed are for
Research Use Only unless otherwise stated.
Accuracy and Precision Assured with LabTec Peristaltic Dispensing System
The LabTec is a walk-up dispensing station; the user selects the solvent volume desired then presses a key or foot switch to initiate the dispensing cycle. The LabTec provides high precision, high accuracy dispensing from milliliters to liters.
Dispensing accuracy and precision is assured with a simple, single key re-calibration feature. For ease of use, up to ten user-defined dispensing volumes can be stored in the LabTec. For inventory control purposes all dispensing activity can be tracked on the easy-to-read display or documented and archived in your PC.
LabTec Automated Dispensing System The LabTec Peristaltic Dispensing System automates the dispensing and diluting of samples. The LabTec has three different dispensing capabilities:
Volumetric Dispensing: Programmable batch-volume dispensing, e.g. the LabTec dispenses 10.00 ml in three seconds with a typical precision of better than 1%. Easy to enter and change aliquot sizes.
Weight Dispensing: The LabTec can be interfaced with an electronic balance for dispensing solutions by weight rather than by volume. Dispensing liquids by weight eliminates the need for pump calibrations while, at the same time, providing a level of accuracy and precision.
Weight Ratio Dispensing: The LabTec can be connected to an electronic scale platform to automatically weigh and dilute samples. Example: for a sample weighing 11.0 grams, the LabTec will automatically dispense 99.0 grams of diluent if the user defined weight ratio is set at 9.00. The LabTec will take 15 seconds to weigh the sample and to dispense the diluent; the typical dispensing precision is better than 0.5%.
LabTec Sample Preparation For Bacteriological Analysis Automated weighing and diluting of food samples can be readily implemented with SciLog's low cost LabTec dispenser. Only an approximate food sample size is needed. The SciLog LabTec dispenser calculates and rapidly dispenses the required diluent. LabTec dispenser increases the speed and increases the precision of the entire sample prep process by automating the weighing as well as the dilution process.
LabTec Automated Solvent Dispensing SciLog has automated the safe and accurate dispensing of solvents supplied in the J.T. Baker CYCLE-TAINER Solvent Delivery System. This solvent dispensing station consists of a J.T. Baker CYCLE-TAINER closed, stainless steel, returnable container and a LabTec Smart Dispenser.
NOTE: This item is from our 'historic' database and may contain information which is not up to date.