New Range of Air Samplers from IUL
Supplied and supported by QM Solutions is the new range of air samplers from IUL. In addition to the Spin Air there are two new cheaper variants. The Spin Air Basic and the Basic Air, the first of these has the same working performances as the Spin Air but is much more inexpensive. It has been designed for users that don't need the connectivity of a slave or bar code reader and where the unit is used in short displacements in which carrying case is not needed.
The Specifications of the Spin Air Basic are:
- Air flow: 100 l/m (90mm plate),60 l/m (Rodac plate),Controlled by microprocessor.
- Air Total Volume: 0-9999 l
- Delay to Start: 60 minutes, divided in seconds.
- Rotation Speed: 0,1,2,3 and 4 rpm.
- Tripod thread: At the bottom.
- Switching adapter: 100-240V AC 50/60 Hz 12V CC 15W
- Battery Pack: Ni metal Hydride 7,2V
- Range: 8 hours full charge (without Slave).
- Weight: 1.35Kg Spin Air
The Basic Air is the classic air sampler reduced to its fundamental features. This means that the rotation of the plate has been eliminated. It has been designed for users that don't need the connectivity of a slave unit or a barcode reader. Also where the unit is used in short displacements in which carrying case is not needed.
The Basic Air specifications are:
- Air flow: 100 l/m (90mm plate), 60 l/m (Rodac plate), Controlled by microprocessor.
- Air Total Volume: 0-9999 l
- Delay to Start: 60 minutes, divided in seconds.
- Tripod thread: At the bottom.
- Switching adapter: 100-240V AC 50/60 Hz 12V CC 15W
- Battery Pack: Ni metal Hydride 7,2V
- Range: 8 hours full charge (without Slave).
- Weight: 1Kg Spin Air
| |
