Are You in Control of Your Data

Improved detection of spoilage yeasts and moulds in beer

{short description of image}

New Thermo Scientific Yeast and Mould Agar (CM920) has now been specifically formulated for use in the brewing industry for the detection of both saccharomyces and non-saccharomyces wild yeasts (which could cause product spoilage) in the presence of culture yeasts.

Thermo Scientific Yeast and Mould Agar is recommended for use with copper in the examination of the microbiological quality of beers in process, pitching yeasts and packaged beers, providing consistent copper binding properties and reproducibility.

The growth and detection of wild yeasts in beer and pitching yeast is complicated by the presence of culture yeast. Taylor and Marsh described the use of MYGP + Copper Medium for the selective isolation of wild yeasts 1 - the addition of copper having an inhibitory effect on culture ale and lager yeasts and thus allowing growth of any wild yeasts present. However the authors recognised that variations in the raw materials of the formulation, such as peptones, malt, yeast extract and agar, could markedly affect the performance of the medium by neutralising the inhibitory action of the copper.

Thermo Scientific has overcome this problem of variability through the careful selection and formulation of raw materials to ensure high quality, reproducible results. Thermo Scientific Yeast and Mould Agar has been optimised for the addition of copper, usually within the range of 50-300mg/l depending on the sensitivity of the culture yeast to copper, as recommended by the Institute of Brewing Methods of Analysis 2.

References:
1. Taylor, G.T. and Marsh, A.S. (1984) J Inst Brew, 90:134-145
2. Institute of Brewing Methods of Analysis. (1997) Volume 2. Microbiological. 23.45


NOTE: This item is from our 'historic' database and may contain information which is not up to date.

Source: Thermo Scientific. View latest company information

Posted: August 5, 2002
Request Information
[will open your email client]

© 2001 - 2017 Rapid Test Methods Ltd • Please join us on Twitter, Facebook and LinkedIn • RSS Feed